1
FE Technical Forum / Re: 1967 fairlane valve cover recommendation
« on: August 17, 2023, 07:41:31 PM »
Jays are the best i have found.He notched the top of mine to clear willwood mc. Not sure on availability.
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
FE Technical Forum / Re: Progress on 105 block
« on: August 02, 2018, 04:45:27 PM »
I have ran that setup for several years in a 66 fairlane bracket car. Just torn down for freshening.Very durable combination.Must have 100 runs on it mostly all ford stuff.
3
FE Technical Forum / Re: 660s on 482?
« on: July 18, 2018, 06:22:58 AM »
I'm sure you have already done this,but make sure the float level is correct.its simple but I am guilty of overlooking it before.
4
Drag Strip Results for FE Powered Vehicles / Re: 1966 GTA Fairlane
« on: June 15, 2015, 10:42:37 AM »
sounds like a cool cruiser,those stock shafts can be dangerous w/sticky tires!
5
Drag Strip Results for FE Powered Vehicles / Re: 66 fairlane gta
« on: May 20, 2015, 09:34:01 PM »6
Drag Strip Results for FE Powered Vehicles / Re: 66 fairlane gta
« on: May 20, 2015, 03:02:48 PM »
i will post one when i get off work,maybe we should all post pics of timeslips too!
7
Drag Strip Results for FE Powered Vehicles / 66 fairlane gta
« on: May 20, 2015, 12:56:42 PM »
Performance Summary:
1/4 mile ET: 11.03 1/4 mile MPH:118
1/8 mile ET: 6.91 1/8 mile MPH:
60 foot time:1.50
Track:silver dollar raceway Renolds,Ga
Weather Conditions:65*
Vehicle Use:bracket
(For example, occasional strip use, street/strip with regular strip use, or strip only)
Vehicle Specifications:
Model Year:1966
Model:fairlane
Style:gta
Engine Details (link to post in Dyno Results board if available:.060 over 390,.030.040,1ub crank lemans rods,icon pistons,8qt pan,62 406 heads,w/ford valves ,comp rocker assm,shell lifters,streetmaster,750qf e-85 2 cylinders w/37-39*leakage
Transmission:c-4w/brake
Torque converter details (if automatic):ati 8"
Clutch details (if manual):
Driveshaft:steel
U-joints:1350
Rear end type:9"
Differential type:spool
Gear Ratio:4.86
Axles:31sp strange
Front tires:goodyear
Front wheels:weld draglite
Rear tires:goodyear 13x31
Rear wheels:weld draglite 15x12
Front suspension information:stock w/6 cyl springs 90/10 shocks
Rear suspension information:chassisworks ladder bars,koni coilovers
Ready-to-race vehicle weight, including driver:3050
waiting on a 427 to get done!
1/4 mile ET: 11.03 1/4 mile MPH:118
1/8 mile ET: 6.91 1/8 mile MPH:
60 foot time:1.50
Track:silver dollar raceway Renolds,Ga
Weather Conditions:65*
Vehicle Use:bracket
(For example, occasional strip use, street/strip with regular strip use, or strip only)
Vehicle Specifications:
Model Year:1966
Model:fairlane
Style:gta
Engine Details (link to post in Dyno Results board if available:.060 over 390,.030.040,1ub crank lemans rods,icon pistons,8qt pan,62 406 heads,w/ford valves ,comp rocker assm,shell lifters,streetmaster,750qf e-85 2 cylinders w/37-39*leakage
Transmission:c-4w/brake
Torque converter details (if automatic):ati 8"
Clutch details (if manual):
Driveshaft:steel
U-joints:1350
Rear end type:9"
Differential type:spool
Gear Ratio:4.86
Axles:31sp strange
Front tires:goodyear
Front wheels:weld draglite
Rear tires:goodyear 13x31
Rear wheels:weld draglite 15x12
Front suspension information:stock w/6 cyl springs 90/10 shocks
Rear suspension information:chassisworks ladder bars,koni coilovers
Ready-to-race vehicle weight, including driver:3050
waiting on a 427 to get done!
8
Drag Week 2013 / Re: Made it to Drag Week 2013!
« on: September 09, 2013, 03:33:46 PM »
Jay,we made a set of intake gaskets one time that didn't have proper oil drain holes,it made quite a mess, just a thought! good luck!
Pages: [1]