427 Rotating Assembly : These parts have Dyno time only. JE custom pistons that fit a 4.255 bore (.020) with a deck height of 10.120, rods are C7AE-B polished and shotpeened with ARP bolts. The big ends have been resized by Blair Patrick. Rings are still on the pistons. 1UB crankshaft : 2.738 and 2.428 (.010 under on both). $1,500.00 for all. sold

Precision Oil Pumps roller rocker assembly complete with rockers, shafts, stands, spacers, shims, new. Made in the USA. $700.00 sold

LSM Systems Engineering Solid Roller Cam has Dyno time only: Intake 430/268, Exhaust 430/274,
LSA 112, overlap 47. $300.00 sold

Erson roller lifters with only Dyno time pn 919313 $250.00 sold

Manton FE pushrods with only Dyno time $175.00 sold

1 set C7AE-B rods $75.00

1 set 390 FE heads C8AE-H cleaned and magged $200.00

390 crankshaft 2U, cleaned and magged .010 rods/mains $175.00

427 crankshaft C4AE-B $300.00

FE iron intake C4SE9425A 4AB. This intake came off an original P-code cop car. Engine was a 390/330 solid lifter unit. $150.00 (heavy)

Edelbrock Performer 390 FE aluminum intake manifold, $200.00

New Ford Trac-loc posi unit for a Dana 60. It is a 30 spline unit and accepts 4.10 and numerically lower gears, includes bearing. $200.00

FE iron intake manifold C9ZE-9425-B correct for 1969-4V rated at 320 HP S-code. $100.00 (heavy)

Holley 800 CFM carb w/dual feed line restored by Joe Bunetic $450.00

Shipping charges not included.
Thanks Jay