« previous next »
Pages: [1]

Author Topic: 463 in machine shop!  (Read 2345 times)

0 Members and 1 Guest are viewing this topic.

stroked67

  • Jr. Member
  • **
  • Posts: 55
    • View Profile
463 in machine shop!
« on: February 02, 2017, 06:54:24 PM »
Took my 463 to machine shop this weekend.  Getting new bearings all the way around, new oil pump, new timing set, new cam, new lifters going with the crower severe duty.  As some of you remember I'm the guy who had a lifter come apart and MUNCH the cam.  Thank god the crank was saved
Logged

TorinoBP88

  • Full Member
  • ***
  • Posts: 109
    • View Profile
Re: 463 in machine shop!
« Reply #1 on: February 03, 2017, 02:54:13 PM »
R U going roller cam?  If so which brand and what are approx specs?
Logged

stroked67

  • Jr. Member
  • **
  • Posts: 55
    • View Profile
Re: 463 in machine shop!
« Reply #2 on: February 18, 2017, 06:05:05 PM »
Oh yeah! Full roller solid lifters, going with the crower hipo severe duty lifters, brand of cam is special grind from the denver area ford fe magician. I havnt recieved a call back on the numbers yet but itll be around 635 int 645 exh with 248 duration.
Logged

stroked67

  • Jr. Member
  • **
  • Posts: 55
    • View Profile
Re: 463 in machine shop!
« Reply #3 on: February 19, 2017, 09:46:37 AM »
Cam research Corp. In Denver Colorado is grinding the cam.
Logged
Pages: [1]
« previous next »